SunStar Heating Products Garage Tube Heater - LP, 45,000 BTU, Model# SIR45-15-L

Price: $769.99
Product prices and availability are accurate as of 2018-08-09 23:19:57 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 1-3 weeks
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

The SunStar Garage Tube Heater is ideal for residential garages, vestibules, entryways, workshops, enclosed patios, restaurants, smoking shelters, small greenhouses, hard-to-heat small areas and low-ceiling height applications. Low intensity radiant heat can save up to 30 in fuel savings over convection warm air heating. Heaters can be controlled by a line Volt thermostat sold separately. If preferred, the heaters can be controlled by a 24V Thermostat and a 24V Thermostat Relay Kit both sold separately. U.S.A. In residential garage applications, the heater must be vented outside through sidewall or the roof. In commercial/industrial space heating applications, the heater can be indirectly vented optional exhaust hood sold separately. Needs Direct Venting Heating Capability sq. ft 2,000, Dim L x W x H in 110 x 18 x 10, Igniter Direct spark, Blower Power Supply Volts, Amps 120, Gas Inlet in 1/2, BTU Output 45,000, Thermostat Not Included, Blower Not Included, Product Type Radiant heat. Compact Sz overall length is 110in for ease of installation Efficiencies range up to 84.5 Installation as low as 8ft above floor CSA design certified Vacuum sys pulls combustion products through the combustion chamber for greater safety, virtually eliminating the possibility of combustion gases leaking into the heated space Solid State Ignition sys offers reliable electronic direct spark ignition sys with 100 gas safety shutoff control and 30-second pre-purge U-Tube Design provides uniform emitter tube Temps and energy distribution on the floor, unlike straight tube heaters which are always hotter at the burner end than at the exhaust end Heavy-duty combustion chamber Aluminum reflectors with 97 reflectivity rating Diaphragm safety switch for proof of venting and sys indicator lights Includes 36in stainless steel flexible gas connector 4in round flue connection 120VAC, 60HZ, 2.4 Amps

Product Features

Compact size: overall length is 110in for ease of installation Efficiencies range up to 84.5% Installation as low as 8ft. above floor CSA design certified Vacuum System pulls combustion products through the combustion chamber for greater safety, virtually eliminating the possibility of combustion gases leaking into the heated space

Write a Review